User guide
Chapter 8: Setting and Use of the Certificate/Key Management Environment Using the SMEE Command
8-2
SSL Libraries Used with the Certificate/Key
Management Environment
This section explains the following topics:
• Types of SMEE Libraries
• Certificate/Key Management Environment
• Environment Setting for Certificate/Key Management Environment
• Operating the Client Certificate
• Resource Registration
• Management of a Certificate/Key Management Environment
Types of SMEE Libraries
With Interstage Application Server, the following SSL libraries can be used (commands used for creating
the environment vary according to the SMEE library to be used):
• SMEE2: SSL library of SMEE 2.2.x or earlier
− Included in Interstage 1.0 and later.
− UTF-8 certificates cannot be used.
− To create and set up the key management environment, the mkslt and mktkn commands are
used.
• SMEE3: SSL library of SMEE 3.x or later
− Included in Interstage Application Server 4.0 or later.
− UTF-8 certificates can be used.
− To create and set up the key management environment, the makeslot and maketoken
commands are used.
In this manual, the above libraries are referred to as SMEE2 and SMEE3.
Note
Use SMEE3 as far as possible.
Table 8-1 shows whether the above SMEE library can be used (O: usable, X: not usable).
Table 8-1 SMEE Library Usage
SSL Library
SMEE2
SMEE3
Interstage HTTP Server X O
Smart Repository X O