User guide

Chapter 4: Operation and Maintenance
4-20
Example
10.131.201.199 – 10.131.201.34 – 10.131.201.88 [2002/09/11 20:28:22 +0900]
– "cn=User001,ou=User,ou=interstage,o=fujitsu,dc=com" Authentication
(basicAuth) failed. (authentication by ID and password is required)
Access Log of Business Server
The access log of the business server records user access.
The record format and contents are as follows:
client [date/time] – “user-identification-information” “access-target”
processing-result (supplementary-information)
Client
IP address of the client that requested access
Date/Time
Access date/time is recorded in the “YYYY/MM/DD HH:MM:SS+XXXX” format.
"+XXXX" refers to the time difference from UTC (Universal Time Coordinate). In cases where "-XXXX"
is used, it means the same as above.
User Identification Information
User identification information (dn or uid) identifies the user that requested access and records the
information in the access log. If the user cannot be identified, ‘unknown’ is recorded.
Access Target
Information that specifies the access target.
Processing Result
The processing result is recorded in the following format:
• If access is requested from the user
Authorization {succeeded|failed}.
Supplementary Information
The cause of authentication failure is recorded.
For details about supplementary information in the access log, refer to “Messages Logged and Output in
Single Sign-on” – “‘Access Log In Single Sign-on Mode” – “Access Log of the Business Server” –
“Supplementary Information in the Access Log of the Business Server’ in Messages.
The cause of the authentication failure will not always be recorded.