User guide

Chapter 4: Operation and Maintenance
4-6
• If InfoProvider Pro is used
Stopping InfoProvider Pro automatically stops a business server. To stop InfoProvider Pro, execute
the ippstop command.
For details on stopping InfoProvider Pro, refer to “Web Server Operation Edition” – “InfoProvider
Pro Operation Commands” in the Reference Manual (Command Edition).
• If Sun ONE Web Server is used
Stopping Sun ONE Web Server automatically stops a business server. To stop Sun ONE Web
Server, execute the ‘stop’ shell.
For details on stopping Sun ONE Web Server, refer to the NSAPI Programmer’s Guide for Sun
ONE Web Server.
Stopping an Authentication Server
To stop an authentication server, use the Interstage Management Console on the server where the
authentication server has been installed. If an authentication server is stopped, a business server
cannot operate. Extreme care must be taken when stopping authentication servers.
For details on starting the Interstage Management Console, refer to the Operator’s Guide. For details
on using the Interstage Management Console window, refer to the Operator’s Guide.
Stopping Interstage HTTP Server stops an authentication server. Use the Interstage Management
Console to select [System] > [Services] > [Web server] > [Web Server: Web Server Status] and then
stop the Interstage HTTP Server. If the authentication server stops normally, information is output to the
system log.
Stopping a Repository Server
To stop a repository server, use the Interstage Management Console on the server where the repository
server has been set up. If a repository server is stopped, an authentication server and business server
cannot operate. Extreme care must be taken when stopping repository servers.
Before stopping an SSO repository, ensure that the repository server has been stopped.
For details on starting the Interstage Management Console, refer to the Operator’s Guide. For details
on using the Interstage Management Console window, refer to the Operator’s Guide.
Stopping a Repository Server
Stopping Interstage HTTP Server automatically stops a repository server. Use the Interstage
Management Console to select [System] > [Services] > [Web server] > [Web Server: Web Server Status],
and then stop the Interstage HTTP Server. If the repository server stops normally, information is output
to the system log.
Stopping an SSO Repository
Use the Interstage Management Console to select [System] > [Services] > [Repository] > [Repository:
View Status] and then stop the SSO repository.
For details on stopping the SSO repository, refer to the Smart Repository Operator’s Guide.