User guide

Setting up a Repository Server and Authentication Server on a Single Machine
2-79
Setting up a Repository Server and Authentication
Server on a Single Machine
This section explains how to set a repository server and an authentication server on a single machine
according to the following procedure using the Interstage Management Console. Refer to the Operator’s
Guide for details of the items to be set on the Interstage Management Console.
1. Select [Security] and then [Single Sign-on] from the System menu. Click [Authentication
infrastructure] and then click the [Authentication infrastructure Settings] tab.
2. Select [Setup Repository server and Authentication server to a single server.] and click [Next].
3. [General Settings] is displayed. Enter [Authentication infrastructure URL], and enter a necessary
SSO repository in [Repository Name]. Configure the items related to SSL as necessary.
When SSL communication uses SSL Accelerator the HTTP header that is used by SSL Accelerator
to post the user certificate must be specified in [HTTP header name for user certificate acquisition].
4. The UserID/Password input window of the password authentication is normally used as the Form
authentication page.
Using the basic authentication dialog on which the Web browser is operating from the Interstage
Management Console, select [Authentication server Detailed Settings [Show]] and specify 'Basic
authentication dialog' under [Input User ID/Password] in the [Password Authentication Settings].
5. Click [Create] to create the repository server and authentication server. A list of the created servers
is displayed. Confirm the port number.
6. After the repository server and authentication server are created, start the repository server. When
the repository server is started, the authentication server is also started. Refer to 'Starting a
Repository Server' for an explanation of the repository server start.
Remark
The repository server and authentication server do not use the port number of the Web server
(Interstage HTTP Server). That is, they do not use the [Port Number] in the [Web Server Settings] tab,
which is found by clicking [Services] and then [Web Server] from the System menu.
To use the Web server (Interstage HTTP Server) only from the repository server and authentication
server, the above port number is not used. The value specified in the [Port Number] must be the same
as the port number of the repository server and authentication server. This setting prevents
unnecessary ports from opening.