User guide

Chapter 2: Environment Setup (SSO Administrators)
2-74
The following example uses the Bourne shell. When password input is requested, enter the password
for access to the Interstage certificate environment. The entered password is not displayed.
# JAVA_HOME=/opt/FJSVawjbk/jdk14;export JAVA_HOME
# scsenter –c –f /tmp/crl.crl
Password:
UX:SCS: INFO: scs0105: CRL was imported
#
Settings for SSL Communication Using SSL Accelerator
To use SSL Accelerator, perform the settings depending on the operating conditions. Refer to “Linkage
with SSL Accelerator” for an explanation of setting SSL Accelerator.
Settings for Operation using Application Gateway
To operate using Application Gateway the environment for the Application Gateway must be set up. For
details, refer to the explanation for the setting of the Application Gateway for 'Linkage with Application
Gateway'.
Setting up One Authentication Server
Set up an authentication server as follows using the Interstage Management Console of the machine on
which the authentication server is to be set up. For details of the items to be defined on the Interstage
Management Console, refer to the Operator’s Guide.
An authentication infrastructure setup file is required to set up the authentication server. Refer to
Downloading the Authentication Infrastructure Setup File under Constructing a Repository Server (One
Server or Update System) for an explanation of creating the authentication infrastructure file.
1. Select [Security] and then [Single Sign-on] from the System menu. Click [Authentication
infrastructure] and then the [Authentication infrastructure Settings] tab.
2. Select [Setup Repository server and Authentication server to the separate servers.], and then click
[Next].
3. The window for selecting a server to be created is displayed. Select [Create a new Authentication
server], and then click [Next].
4. [General Settings] is displayed. In [Authentication infrastructure setup file], select the
authentication infrastructure setup file that was downloaded from the repository server (update
system).
5. Enter the password that was set for the authentication infrastructure setup file, and set the items for
SSL when necessary.
When SSL communication uses SSL Accelerator specify the HTTP header that is used by SSL
Accelerator to post the user certificate in [HTTP header name for user certificate acquisition].