User guide

Setup of Authentication Server
2-63
Setup of Authentication Server
This section explains the procedure for setting up of the authentication server that provides the
authentication infrastructure. Use the Interstage Management Console to set up the authentication
server.
SSL Communication Environment Setup
The SSL environment must be set up before the authentication infrastructure.
The flow of setting up SSL communication environment is shown below.
SSL Communication using Authentication Server
If using SSL communication on the authentication server, perform the following steps according to the
operating conditions:
1. Required settings
Refer to Preparations for SSL Communication.
Refer to Settings for SSL Communication.
2. Confirming validity of certificate
In addition to the above settings, perform the operations explained in Preparations for Confirming
Validity of Certificate Authentication.
3. Operation using Application Gateway
In addition to the above settings, perform the operations explained in Settings for Operation using
Application Gateway.
SSL Communication using SSL Accelerator
To execute SSL communication using the SSL accelerator, configure the settings according to the
operation shown below.
1. Required settings
Refer to Settings for Settings for SSL Communication Using SSL Accelerator
2. Confirming validity of certificate
In addition to the above settings, perform the operations explained in Preparations for Confirming
Validity of Certificate Authentication.