User guide

Chapter 2: Environment Setup (SSO Administrators)
2-62
Notes
• When the Microsoft® Internet Explorer is used as the browser, an authentication infrastructure
setup file with an absolute path length that exceeds 200 bytes may not be able to be specified with
the Browse button. In this case, change the location of the authentication infrastructure setup file
so that its absolute path length is shorter.
• The authentication infrastructure setup file is important for security. Always delete this file after the
repository server (reference system) is set up.
Changing the Settings of the SSO Repository of the Repository Server (Update System)
Set the information on the SSO slave repository of the added repository server (reference system) in the
SSO master repository of the repository server (update system). Perform the following procedure on the
Interstage Management Console of the repository server (update system):
1. Click [Services] and then [Repository] from the System menu, and from the [Repository: View
Status] window select the SSO repository for master operation.
2. Click [Detailed Settings [Show]]. Go to Step 3 when 'Master' is selected as the [Operation mode] of
[Replication Settings].
When 'Master' is not selected, select 'Master'. [Replication destination host list] is displayed.
3. Click [Add], and enter the machine information of the repository server (reference system) to be
added in each item field of the newly displayed [Replication connection Settings] Click [Update].
Host name
Enter the host name of the SSO slave repository.
Port number
Enter the [SSL Port number] that was set for the SSO slave repository.
Enable SSL encryption?
Select 'Yes'.
Present client certificate?
Select 'Yes' or 'No'.
SSL configuration
When 'Yes' is selected in [Present client certificate?], select the SSL configuration that was
defined as described in Setup of the SSL communication environment for repository server
(update system).
DN for the connection
Enter the same administrator DN as that specified for the SSO repository (slave).
Password for the connection
Enter the same password as the administrator DN password specified for the SSO repository
(slave).
4. Check the check box of an SSO repository for which settings are changed, and click [Start] to start
the SSO repository.