User guide

Repository Server Setup
2-57
General Settings
− Repository Name (*1)
Enter the same name as that of the SSO repository (master) that was created for the repository
server (update system).
− Administrator DN (*1)
Enter the DN (distinguished name) of the administrator who manages the created SSO
repository. This value must be specified in dn=distinguished-name format (example:
cn=manager).
− Administrator DN password
Enter the password for the SSO administrator.
− Administrator DN password (re-enter)
Enter the password for the SSO administrator again.
− Public Directory (*1)
Set the same directory as that for the SSO repository (master) that was created for the
repository server (update system).
− Create default tree? (*1)
Set the same tree as that of the SSO repository (master) that was created for the repository
server (update system).
− Port number (*1)
Specify the port number for non-SSL communication.
− Enable SSL encryption? (*1)
Select 'Yes'.
− SSL Port number(*1)
Specify the port number for SSL communication. The default value is '636'. Change this value
when necessary.
− SSL configuration
Select the SSL configuration that was defined as described in Setting up the SSL
Communication Environment for the Repository Server (Reference System)
Detailed Settings
Database Configuration
− Database Definition
Maximum Number of Entries to be Retrieved The default value is '500'. Change this value when
necessary.
− Cache Size
The default value is '1000' pages. One page consists of 4 KB. Change this value when
necessary.