Service manual

Installation
28 Sun ONE Directory Server Installation and Tuning Guide • June 2003
4. Run the following command as super user:
root# /usr/sbin/directoryserver idsktune -q > idsktune.out
idsktune
suggests changes you may make to the system.The subcommand
itself makes no changes to the system.
5. Fix at least all ERROR conditions indicated.
If you do not fix
ERROR conditions, installation may fail. Notice that the
idsktune subcommand reports as missing all patches recommended at the
time of release and not installed on the system, even patches for packages not
installed on the system.
You may download patches from
http://sunsolve.sun.com/.
Refer to Chapter 5, “Tuning the Operating System” for more information.
Configuring Directory Server
1. Start the configuration program.
To use the graphical user interface:
root# /usr/sbin/directoryserver configure
Tousethecommand-lineinterface:
root# /usr/sbin/directoryserver configure -nodisplay
The first installation screen appears.
2. Follow the instructions on each screen using the work sheet you made when
“Preparing Installation Information,” on page 21.
Table 1-8 Whether to Patch Components
On your system... Do this...
The packages are already installed, and the patches
have been applied.
Proceed to Step 4.
The packages are already installed, but the patches
have not been applied.
Apply the appropriate patches for your platform
provided with Directory Server.
The packages are not yet installed. Install the packages and appropriate patches
provided with Directory Server.