Installation guide
3. Remount the filesystem.
/usr/sbin/mount -F vxfs -o largefiles /dev/vg01/export
2.2.3.2.5. DNS Requirements
It is very important that DNS and reverse DNS be working correctly on the host machine, especially if you
are using TLS/SSL or Kerberos with Directory Server.
Configure the DNS resolver and the NIS domain name by the modifying the /etc/resolv.conf,
/etc/nsswitch.conf, and /etc/netconfig files, and set the DNS resolver for name resolution.
Edit the /etc/defaultdom ain file to include the NIS domain name. T his ensures that the fully-
qualified host and domain names used for the Directory Server resolve to a valid IP address and that
that IP address resolves back to the correct hostname.
Then, reboot the HP-UX machine to apply these changes.
2.2.4. Sun Solaris 9
Directory Server on Solaris 9 requires an UltraSPARC (SPARC v9) processor, which 64-bit applications
as well as high-performance and multi-processor systems. Earlier SPARC processors are not
supported. Use the isainfo command to verify that the system has support for sparc9. Verify the
system's kernel configuration, install the appropriate modules and patches, and then fine-tune the
system to work with Sun Solaris 9.
The system requirements are listed in Table 2.7, “Sun Solaris sparcv9”. The required patches are listed
in Section 2.2.4.1, “Solaris Patches”, and the recommended configuration changes are described in
Section 2.2.4.2, “Solaris System Configuration”.
Chapter 2. System Requirements
29