Manualshelf

Installation guide

ManualsBrandsRed Hat ManualsComputer equipmentNETSCAPE DIRECTORY SERVER 6.02 - DEPLOYMENT
61626364656667686970
Installing and Configuring the Installation Type I Agents
70 Sun ONE Identity Server Policy Agents 2.1 • Web Policy Agents Guide • September 2004
8. Provide the following information about the web server that runs Sun ONE
Identity Server:
Primary Server Host: Enter the FQDN of the system where the primary web
server that runs Sun ONE Identity Server is installed. For example,
myserver.example.com.
Primary Server Port: Enter the port number for the web server that runs Sun
ONE Identity Server.
Primary Server Protocol: If the web server that runs Sun ONE Identity Server
is SSL-enabled, select HTTPS; otherwise select HTTP.
Primary Server Deployment URI: Enter the location that was specified when
Sun ONE Identity Server was installed. The default URI for Sun ONE Identity
Server is
/amserver.
Primary Console Deployment URI:Enterthelocation that wasspecifiedwhen
Sun ONE Identity Server console was installed. The default URI for Sun ONE
Identity Server is /amconsole.
Failover Server Host: Enter the FQDN for the secondary web server that will
run Sun ONEIdentity Server ifthe primary webserverbecomes unavailable.If
no failover host exists, then leave this field blank.
Failover Server Port: Enter the port number of the secondary web server that
runs Sun ONE Identity Server. If no failover host exists, then leave this field
blank.
Failover Server Deployment URI: Enter the location that was specified when
Sun ONE Identity Server was installed. The default URI for Sun ONE Identity
Server is /amserver. If no failover host exists, then leave this field blank.
Agent Identity Server Shared Secret: Enter the password for the Identity
Server internal LDAP authentication user.
Re-enter Shared secret: Re-enter the password for the Identity Server internal
LDAP authentication user.
CDSSO Enabled: Check this box if you want to enable the CDSSO feature.
9. If all the information entered is correct, click Next.
10. Review the installation summary to be sure that the information you’ve
entered is correct. Note that it displays the CDCServlet URL if you have
checked the CDSSO Enabled box in the previous panel. If you want to make
changes, click Back. If all the information is correct, click Next.
11. In the Ready to Install page, click Install Now.