Installation guide

Configuring the Agent for Multiple Web Server Instances
Chapter 2 Policy Agents on Solaris and HP-UX 45
1. To configurethe agentfor additional web server instances on a system, run the
config script from the bin directory using the following command:
# ./config
2. Follow the prompts to configure additional web server instances. For
information on each of the prompts, see “Installing the Policy Agent for a Web
Server.” In general, information needs to be entered for both theprotected web
server instance and the Sun ONE Identity Server server(s). The following text
shows an example.
If you are installing the agent for Lotus Domino, the following example will
show theLotus Domino Data Directory in the placeof theWeb Server Instance
Directory.
NOTE
On HP-UX 11.11, you must use the scripts config_es6 and unconfig_es6 to
configure and unconfigure the agent for multiple web server instances. These
scripts are available in the following directory:
Agent_Install_Dir/agents/WS_TYPE/bin
# ./config
Enter the Web Server Instance Directory: [/web_server_root/https-server_instance]
Enter the Local Hostname: [mycomputer.eng.example.com]
Enter the Agent Web Server Port: [80]
Select Agent Web Server Protocol: [1] http [2] https-->[1]
Enter the Agent Deployment URI: [/amagent]
Select Identity Server Protocol: [1] http [2] https --> [1]
Enter the Identity Server Hostname: [mycomputer.eng.example.com]
Enter the Identity Server Port: [58080]
Enter the Identity Server Deployment URI [/amserver]
Enter the Identity Server's Console Deployment URI [/amconsole]
Select Failover Identity Server Protocol: [1] http [2] https [3] no failover
--> []
Enter the Failover Identity Server Hostname: []mycomputer.example.com
Enter the Failover Identity Server Port: []
Enter the Identity Server Deployment URI [/amserver]
Enter the Identity Server's Console Deployment URI [/amconsole]
Enter Agent-Identity Server shared secret:
Re-enter Agent-Identity Server shared secret:
Is CDSSO Enabled: [1] yes [2] no --> [2] 1
Configuring webserver ... Webserver version: 6.0
Done