Installation guide

Installing the Agent
116 Sun ONE Identity Server Policy Agents 2.1 • Web Policy Agents Guide • April 2005
7. When all the information is entered correctly, click Next.
8. Enter information about the web server that runs Sun ONE Identity Server
policy and management. The policy agent will connect to this server.
Primary Server Host: Enter the FQDN of the system where the primary web
server that runs Sun ONE Identity Server is installed. For example,
myserver.example.com.
Primary Server Port: Enter the port number for the web server that runs Sun
ONE Identity Server.
Primary Server Protocol: If the web server that runs Sun ONE Identity Server
is SSL-enabled, select HTTPS; otherwise select HTTP.
Primary Server Deployment URI: Enter the location that was specified when
Sun ONE Identity Server was installed. The default URI for Sun ONE Identity
Server is /amserver.
Primary Console Deployment URI:Enterthelocation that wasspecifiedwhen
Sun ONE Identity Server console was installed. The default URI for Sun ONE
Identity Server is /amconsole.
Failover Server Host: Enter the FQDN for the secondary web server that will
run Sun ONEIdentity Server ifthe primary webserverbecomes unavailable.If
no failover host exists, then leave this field blank.
Failover Server Port: Enter the port number of the secondary web server that
runs Sun ONE Identity Server. If no failover host exists, then leave this field
blank.
Failover Server Deployment URI: Enter the location that was specified when
Sun ONE Identity Server was installed. The default URI for Sun ONE Identity
Server is /amserver.
Failover Console Deployment URI: Enter the locationthatwasspecifiedwhen
Sun ONE Identity Server console was installed. The default URI for Sun ONE
Identity Server is /amconsole.
Agent Identity Server Shared Secret: Enter the password for the Identity
Server internal LDAP authentication user.
Re-enter Shared secret: Re-enter the password for the Identity Server internal
LDAP authentication user.
CDSSO Enabled: Check this box if you want to enable CDSSO feature.
9. When all the information is entered correctly, click Next.