Installation guide

55
Chapter 5
Post Installation
This chapter describes the post-installation procedures for launching the online
help and populating the directory tree.
This chapter has the following sections:
• Launching the Help System (page 55)
• Populating the Directory Tree (page 56)
Launching the Help System
The help system for Directory S erver is dependent upon Netscape Administration
Server. If you are running Directory Server Console on a machine remote to
Administration Server, you will need to confirm the following:
Client IP address authorized o n Administration Server.Themachinerunning
Directory Server Console needs access to Administration Server. To configure
Administration Server t o accept the client machine’s IP address, do the following
in Administration Server:
1. Lau nch Administration Server Console. The console should be running on the
same machine a s Administration Server.
2. Click the Configuration tab, then click the Network tab.
3. In the Connection Restricti on s Settings, select “IP Addresses to Allow” from
the pull down menu. Click Edit.
4. Edit the IP Addresses field to the following: *.*.*.*
This allows all clients access to Administration Server.
5. Restart Administration Server. You can now launch the online help by clicking
any of the Help buttons in the D irectory S erver Console.