Installation guide

Sun StorageTek Common Array Manager Software Release Notes 45
Linux: Checking The UTM LUNs and Start/Stop of the
Proxy Agent
Note – The SMagent requires Red Hat 5.1 (also known as “5 update 1”) or higher. It
is not supported on Red Hat 5.0.
Download CAM in-band proxy agents for Linux here:
http://www.sun.com/download/products.xml?id=471e7573
To verify the host sees the arrays management (UTM) LUN, do the following:
1. Start/Stop Agent
[root@nsvr-150 agent]# /opt/SMgr/agent/SMagent start
Stopping Agent process 12632.
SMagent started.
[root@nsvr-150 agent]# SANtricity Storage Array Host Agent,
Version 09.17.A0.03
Built Tue Dec 05 14:52:38 CST 2006
Copyright (C) 1999-2006 LSI Logic Corporation. All rights
reserved.
Checking device /dev/sda (/dev/sg0): Skipping
Checking device /dev/sdb (/dev/sg1): Skipping
Checking device /dev/sdc (/dev/sg2): Activating
Running...
2. Checking for UTM LUN
[root@nsvr-150 agent]# java -classpath
/opt/SMgr/agent/SMagent.jar
devmgr.versioned.agent.DeviceIdentifier | grep “Volume
Access” /dev/sdc
(/dev/sg2) [Storage Array fms-lca1, Volume Access, LUN 31,
Volume ID <600a0b80002fc0740000000000000000>]