Installation guide

42 Book Title without trademarks, or an abbreviated book title • March 2008
■ Do not install Baseline (this is the only option when firmware is already up-to-
date)
Installation Guide says “Solaris” instead of “SSCS” on page 44
Page 44 of the Sun StorageTek Common Array Manager Software Installation Guide,
v.6.0 ((part number 820-0213-nn) should state:
“...remotely logging in to a management software station or by using the SSCS
remote client on a remote host.” The Installation Guide currently says “Solaris”
instead of “SSCS.”
Online Help Does not Define the Type Field on the Snapshot Summary
Page
Bug 6593949 –The online Help does not provide a description for the Type field on
the Snapshot Summary page. The Type field refers to the model number of the array.
For example, 6140, 6130, 6540, 2530, 2540, FLX240, FLX280, FLX380, etc.
SSCS CLI Command Paths
Some distributed versions of the Sun StorageTek Common Array Manager CLI Quick
Reference had the wrong paths to the SSCS CLI command line.
These paths should be stated as follows:
Solaris: /opt/SUNWsesscs/cli/bin/sscs
Linux: /opt/sun/cam/se6x20/bin/sscs
Windows:
%Program Files%\Sun\Common Array Manager\Component\sscs\bin
Volumes Supported on the Sun StorageTek 6130 Array up to 1022
Bug 6540170 – Common Array Manager can be used to create up to 1022 volumes
(volumes 0 through 1021) on the Sun StorageTek 6130 array. However, if the Access
LUN is in use, up to 1023 volumes (volumes 0-1022) can be created. If you attempt to
create more than the supported number of volumes, an error message is returned.