Installation guide

Sun StorageTek Common Array Manager Software Release Notes 27
Upgrading Array Firmware / Installing the
Firmware Baseline
The Install Firmware Baseline function is available as a separate feature in the Sun
StorageTek Common Array Manager software. The software prompts you when the
array’s firmware needs to be upgraded. It is not necessary to uninstall the existing
firmware before following this procedure.
If you are adding new expansion trays, see “Upgrading Firmware for Additional
Expansion Trays” on page 28.
Prerequisite: Before you perform this task, be sure the array is not in a degraded
state. If it is degraded, the upgrade will fail.
1. Log in to the management software as documented in the Sun StorageTek
Common Array Manager Software Installation Guide (part number 820-0213-nn).
2. From the Java Web Console page, click Sun StorageTek Common Array
Manager.
3. From the Storage System Summary page, select the array for which the
firmware needs to be installed/upgraded.
4. Click the Install Firmware Baseline button, and follow the prompts.