Installation guide

Sun StorageTek Common Array Manager Software Release Notes 21
Common Array Manager firmware is installed in the following locations:
■ Solaris: /opt/SUNWstkcam/share/fw
■ Windows: <system drive>:\Program Files\Sun\Common Array Manager\
Component\SunStorageTekArrayFirmware\
■ Linux: /opt/sun/cam/share/fw/
Within the directory where you installed the firmware, a README file for each
array type define the firmware baseline.
■ README_2500.txt defines the firmware baseline for the Sun StorageTek 2500
Series Arrays.
■ README_6000.txt defines the firmware baseline for the Sun StorageTek 6130,
6140, 6540, FLX240, FLX280, and FLX380 arrays.
Firmware files are located in the /images subdirectory.
Firmware Version
TABLE 13 lists the firmware for this release of Sun StorageTek Common Array
Manager software.
Check the build notes file distributed with the software for the exact firmware build.
The Sun StorageTek Common Array Manager software will support one prior
version of the firmware for legacy features on previously supported arrays. (This
does yet apply to the new Sun StorageTek 2500 Series Arrays).
For information about how to install firmware, see “Upgrading Array Firmware /
Installing the Firmware Baseline” on page 27.
The firmware files for each array are listed in “Firmware Files” on page 20.
TABLE 13 Release Firmware Level
Array Firmware Version
Sun StorageTek 6540, 6140, and 6130 Arrays 06.19.25.16
Sun StorageTek 2500 Series Arrays 06.70.42.10
Sun StorageTek Flexline 240, 280, and 380 Arrays 06.19.25.26