Installation guide

Sun StorageTek Common Array Manager Software Release Notes 15
Uninstalling a Previous CAM Version
1. Log in to the CLI on the management host or using the remote CLI client as
documented in the Sun StorageTek Common Array Manager Software Installation
Guide (part number 820-0213-nn).
2. Navigate to the appropriate directory for your operating system:
For Windows, navigate to:
%systemdrive%\Sun\CommonArrayManager\Host_Software_6.0.0.10\
bin\uninstall.bat
For Solaris and Linux, navigate to:
/var/opt/CommonArrayManager/Host_Software_6.0.0.10/bin/uninsta
ll
For the Suse 9 platform, CLI uninstall requires the following rpm packages:
■ libgcj-3.3.3-43.24.x86_64.rpm
■ getttext-0.1.14.1-30.1.x86_64.rpm
3. Enter the command uninstall -f
The command will remove the current installation.
Installing and Upgrading Common Array
Manager Software
If you are installing the management software on a new host, follow the entire
installation and configuration procedure described in the Sun StorageTek Common
Array Manager Software Installation Guide (part number 820-0213-nn).
After initial installation and configuration, you can upgrade the management
software and firmware with each release.
The installer also installs the firmware update bundle on the host server. To upgrade
the firmware on the array, see “Upgrading Array Firmware / Installing the
Firmware Baseline” on page 27.