Installation guide

Sun StorageTek Common Array Manager Software Release Notes 13
Installing Packages and Patches
The array installation procedures are described in the Sun StorageTek Common Array
Manager Software Installation Guide (part number 820-0213-nn). This section describes
release-specific steps for firmware and management software patch upgrades that
you must perform:
■ “Prerequisites” on page 13
■ “Supported Upgrades” on page 14
■ “Installation Logs” on page 14
■ “Uninstalling a Previous CAM Version” on page 15
■ “Installing and Upgrading Common Array Manager Software” on page 15
■ “Command-Line (Minimal) Installation” on page 16
Prerequisites
Before you perform an installation procedure, do the following:
1. Locate the management software.
The management software is distributed on the Sun StorageTek Common Array
Manager Software CD and is also available from the Sun Download Center
(Systems Administration > Storage Management) here:
http://www.sun.com/download/
2. Locate the most current patches.
For the latest patches available for your system, check SunSolve at
http://www.sunsolve.sun.com
3. Verify that you have license certificates for all premium features, including
storage domains.
See “Licensing Optional Premium Features” on page 3.
4. Read the installation instructions.
See your Sun StorageTek Common Array Manager Software Installation Guide (part
number 820-0213-nn)
5. Log in as root (Solaris and Linux) or as a user with administrator privilege
(Windows) on the management host.
6. Note that before starting the installation script, the CD verifies host
requirements, such as the following: