Manualshelf

Installation guide

ManualsBrandsRed Hat ManualsComputer equipmentNETSCAPE DIRECTORY SERVER 6.01 - DEPLOYMENT
61626364656667686970
56
Pramati Server 3.5 Administration Guide
You can modify details for the Lookup Port (mandatory field), while the Host address is shown as a
non-editable field. Save the modifications made. You can even start the specific Server from this
page using the ‘Start’ button.
Starting Standalone Message Server
To start the Server:
1 On the Server Administration Service Home page, click ‘Start’ against the required Standalone
Message Server.
2 The ‘Home > Message Server’ page appears displaying the following fields to be specified to start
the ‘Demo_MsgServer’.
3 The fields Name, Host, and Lookup Port cannot be edited. These values are the same that were
used while adding the server, and are displayed as default. You need to provide the following
details:
Viewing details of Standalone Message Server
To view the details for the new server, click its name that is provided as a link on the Server
Administration Service page. This takes you to the ‘Home > Message Server’ screen showing the
details for the Host and Lookup Port.
Once the server has started, you can connect to it from this screen using the Connect button
provided.
Connecting to Standalone Message Server
To connect to the Standalone Message Server:
1 Once you have started the Standalone Message Server, click ‘Connect’. This takes you to the
login screen for Console.
2 Enter the user name as ‘root’ and password as ‘pramati’. Click ‘Login’.
3 On successful login, the Console Home page appears. You can see the configuration details of the
connected server in the ‘Server Configuration’ section.
Table 17: Details needed for starting a Standalone Message Server
Fields Description
Realm Provide here the Realm name. By default, this appears as ‘system’.
User Name Provide here the user name for the specified Realm. By default, this appears as root for the ‘system’
Realm.
Password Provide here the password for authenticating the user name. For the user name root, the default
password is ‘pramati’.
JVM options Provide here the JVM options, if you want to pass any Java options.