Installation guide

48
Pramati Server 3.5 Administration Guide
Connecting to Load Balancer
To connect to the Server:
1 Once you have started the Server, the started Server is shown as a blue icon, and ‘Start’ is replaced
by a ‘Connect’ button.
2 Clicking ‘Connect’ takes you to the login screen for the Console.
3 Enter the user name as ‘root’ and password as ‘pramati’. Click ‘Login’.
4 The Console Home page appears. You can see the configuration details of the connected Server
in the ‘Server Configuration’ section.
Stopping Load Balancer
To stop a connected server, click ‘Stop’ in the Console. To exit from the Console, click ‘Logout’.
In the Administration Service main page, the status appears as "stopped".
Note: You must refresh the main page to verify the status.
Removing a Load Balancer
You can remove a Load Balancer only if it is not running. To remove a Load Balancer:
1 On the Server Administration Service main page, select the Load Balancer that is to be removed.
2 Click ‘Delete’. This deletes the selected Load Balancer.
Password Provide here the password for authenticating the user name. For the user name ‘root’, the
default password is ‘pramati.’
JVM options Provide here the JVM options, if you want to pass any Java options.
Table 12: Details needed for starting a Server
Fields Description