Specifications
Table Of Contents
- Virtual Machine Guide
- Contents
- Introduction and System Requirements
- VMware Server Overview
- Features of VMware Server
- Support for 32-bit and 64-bit Guest Operating Systems
- Two-Way Virtual SMP (Experimental Support)
- Connect to VMware GSX Virtual Machines and Hosts
- Upgrade and Use GSX Virtual Machines
- Move Existing Virtual Machines
- Compatible with VMware Workstation 5.x Virtual Machines
- Configure Virtual Hardware Devices to be Automatically Detected
- Take and Revert to Snapshots in the Background
- Support for VMware Virtual Machine Importer
- Support for VirtualCenter
- APIs Included with VMware Server
- Host System Requirements
- Virtual Machine Specifications
- Virtual Processor
- Virtual Chipset
- Virtual BIOS
- Virtual Memory
- Virtual Graphics
- Virtual IDE Drives
- Virtual SCSI Devices
- Virtual PCI Slots
- Virtual Floppy Drives
- Virtual Serial (COM) Ports
- Virtual Parallel (LPT) Ports
- Virtual USB ports
- Virtual Keyboard
- Virtual Mouse and Drawing Tablets
- Virtual Ethernet Card
- Virtual Networking
- Virtual Sound Adapter
- Supported Guest Operating Systems
- Technical Support Resources
- Creating a New Virtual Machine
- Using VMware Tools
- About VMware Tools
- Installing VMware Tools
- Installing VMware Tools in a Windows Virtual Machine
- To install VMware Tools in a Windows Guest Operating System
- Additional Steps When Migrating from Old Versions of Windows
- To migrate from Windows NT guest operating systems
- To migrate from Windows Me guest operating systems
- To migrate from Windows 98 guest operating systems
- To migrate from Windows 95 guest operating systems
- Automating the Installation of VMware Tools in a Windows Guest
- Installing VMware Tools in a Linux Virtual Machine
- Installing VMware Tools in a NetWare Virtual Machine
- Installing VMware Tools in a Windows Virtual Machine
- Executing Scripts When the Virtual Machine’s Power State Changes
- Configuring VMware Tools
- Configuring VMware Tools in a Windows Virtual Machine
- Configuring VMware Tools in a Linux, FreeBSD, or Solaris Virtual Machine
- Configuring VMware Tools in a NetWare Virtual Machine
- Configuring VMware Tools in a NetWare 6.5, 6.0, or NetWare 5.1 Guest
- Viewing Information About VMware Tools
- Connecting Devices with VMware Tools
- Shrinking Virtual Disks with VMware Tools
- Setting Options with VMware Tools
- Configuring VMware Tools for NetWare Guests in the System Console
- Summary of VMware Tools Commands for a NetWare Guest
- About the VMware Tools Service
- Running Virtual Machines
- Overview of the VMware Server Console Window
- Connecting to Virtual Machines and VMware Server Hosts
- Changing the Power State of a Virtual Machine
- Controlling the Virtual Machine Display
- Running Virtual Machines from DVDs or CD-ROM Discs
- Using PXE with Virtual Machines
- Installing Software in a Virtual Machine
- Cutting, Copying, and Pasting Text
- Using Devices in a Virtual Machine
- Command Reference
- Preserving the State of a Virtual Machine
- Suspending and Resuming Virtual Machines
- Taking Snapshots
- Using Disks in a Virtual Machine
- Configuring Hard Disk Storage in a Virtual Machine
- Configuring Optical and Floppy Drives
- Adding Drives to a Virtual Machine
- Using VMware Virtual Disk Manager
- Installing an Operating System onto a Physical Partition
- Disk Performance in Windows NT Guests on Multiprocessor Hosts
- Networking
- Components of the Virtual Network
- Common Networking Configurations
- Custom Networking Configurations
- Changing the Networking Configuration
- Advanced Networking Topics
- Selecting IP Addresses on a Host-Only Network or NAT Configuration
- Avoiding IP Packet Leakage in a Host-Only Network
- Maintaining and Changing the MAC Address of a Virtual Machine
- Controlling Routing for a Host-Only Network on a Linux Host
- Issues with Host-Only Networking on a Linux Host
- Setting Up a Second Bridged Network Interface on a Linux Host
- Configuring Bridged Networking When Using Teamed Network Interface Cards
- Setting Up Two Separate Host-Only Networks
- To set up the second host-only interface on a Windows host
- To set up the second host-only interface on a Linux host
- Configuring the Virtual Machines
- Configuration 1 - Connect to the Default Host-Only Interface
- Configuration 2 - Connect to the Newly Created Host-Only Interface
- Configuration 3 - Connect to Two Host-Only Interfaces
- Routing Between Two Host-Only Networks
- Setting Up the First Host-Only Interface
- To set up the second host-only interface on a Windows host
- To set up the second host-only interface on a Linux host
- Setting Up the Virtual Machines
- Virtual Machine 1 - Connected to the Default Host-Only Interface
- Virtual Machine 2 - Connected to the Newly Created Host-Only Interface
- Virtual Machine 3 - Connected to Both Host-Only Interfaces
- Using Virtual Ethernet Adapters in Promiscuous Mode on a Linux Host
- Understanding NAT
- Using Samba for File Sharing on a Linux Host
- Sample smb.conf for Host-Only Networking
- Sample smb.conf for Bridged Networking
- Adding User Names and Passwords to the VMware Server Samba Password File
- If You Are Already Running Samba
- Using a Samba Server for Both Bridged and Host-Only Networks
- Using VMware Server’s Samba with an Existing Installation
- Sample smb.conf for Running Two Samba Servers at the Same Time
- Configuring Devices
- Using Parallel Ports
- Using Serial Ports
- Keyboard Mapping on a Linux Host
- Using USB Devices in a Virtual Machine
- Connecting to a Generic SCSI Device
- Using Two-Way Virtual Symmetric Multiprocessing (Experimental)
- Video and Sound
- Performance Tuning for Virtual Machines
- Glossary
- Index
VMware Server Virtual Machine Guide
44 VMware, Inc.
VMware!Mouse!driver,!the!VMware!SCSI!driver,!the!VMware!vmxnet!networking!
driver!(the!vlance!driver!is!installed!automatically!when!you!created!the!virtual!
machine)!and!the!shared!folders!driver!(for!use!by!virtual!machines!with!VMware!
Workstation).
If!you!plan!on!using!this!virtual!machine!with!other!VMware!products,!use!the!
complete!installation.!To!choose!the!complete!installation,!select!Complete,!click!
Next,!then!go!to!step!7.
Custom!Installation
A!custom!installation!lets!you!pick!and!choose!which!components!to!install.!You!
can!always!run!the!installer!again!at!a!later!date!to!install!components!you!did!not!
install!the!first!
time,!or!remove!components!you!no!longer!want.!Select!Custom!
and!click!Next.!The!Custom!Setup!screen!appears.
In!the!Custom!Setup!screen,!pick!and!choose!the!components!to!install.!Click!the!
arrow!to!the!left!of!the!component!you!do!not!want!to!install!and!select!the!
appropriate!option!from
!the!menu.
If!you!need!to!determine!how!much!free!space!is!on!the!guest,!click!Space.!This!is!
useful!if!you!are!choosing!a!custom!installation!due!to!limited!disk!space!on!your!
guest.
If!you!want!to!install!all!the!VMware!Tools!components!in!a!directory!other!than!
the
!default,!click!Browse!and!select!the!directory.!If!the!directory!does!not!exist,!the!
installer!creates!it!for!you.
When!you!are!ready!to!continue,!click!Next.
7To!change!any!settings!or!information!you!provided,!click!Back!until!you!reach!the!
dialog!box!containing!the!information!you!want!to!change.!