Specifications
Table Of Contents
- Virtual Machine Guide
- Contents
- Introduction and System Requirements
- VMware Server Overview
- Features of VMware Server
- Support for 32-bit and 64-bit Guest Operating Systems
- Two-Way Virtual SMP (Experimental Support)
- Connect to VMware GSX Virtual Machines and Hosts
- Upgrade and Use GSX Virtual Machines
- Move Existing Virtual Machines
- Compatible with VMware Workstation 5.x Virtual Machines
- Configure Virtual Hardware Devices to be Automatically Detected
- Take and Revert to Snapshots in the Background
- Support for VMware Virtual Machine Importer
- Support for VirtualCenter
- APIs Included with VMware Server
- Host System Requirements
- Virtual Machine Specifications
- Virtual Processor
- Virtual Chipset
- Virtual BIOS
- Virtual Memory
- Virtual Graphics
- Virtual IDE Drives
- Virtual SCSI Devices
- Virtual PCI Slots
- Virtual Floppy Drives
- Virtual Serial (COM) Ports
- Virtual Parallel (LPT) Ports
- Virtual USB ports
- Virtual Keyboard
- Virtual Mouse and Drawing Tablets
- Virtual Ethernet Card
- Virtual Networking
- Virtual Sound Adapter
- Supported Guest Operating Systems
- Technical Support Resources
- Creating a New Virtual Machine
- Using VMware Tools
- About VMware Tools
- Installing VMware Tools
- Installing VMware Tools in a Windows Virtual Machine
- To install VMware Tools in a Windows Guest Operating System
- Additional Steps When Migrating from Old Versions of Windows
- To migrate from Windows NT guest operating systems
- To migrate from Windows Me guest operating systems
- To migrate from Windows 98 guest operating systems
- To migrate from Windows 95 guest operating systems
- Automating the Installation of VMware Tools in a Windows Guest
- Installing VMware Tools in a Linux Virtual Machine
- Installing VMware Tools in a NetWare Virtual Machine
- Installing VMware Tools in a Windows Virtual Machine
- Executing Scripts When the Virtual Machine’s Power State Changes
- Configuring VMware Tools
- Configuring VMware Tools in a Windows Virtual Machine
- Configuring VMware Tools in a Linux, FreeBSD, or Solaris Virtual Machine
- Configuring VMware Tools in a NetWare Virtual Machine
- Configuring VMware Tools in a NetWare 6.5, 6.0, or NetWare 5.1 Guest
- Viewing Information About VMware Tools
- Connecting Devices with VMware Tools
- Shrinking Virtual Disks with VMware Tools
- Setting Options with VMware Tools
- Configuring VMware Tools for NetWare Guests in the System Console
- Summary of VMware Tools Commands for a NetWare Guest
- About the VMware Tools Service
- Running Virtual Machines
- Overview of the VMware Server Console Window
- Connecting to Virtual Machines and VMware Server Hosts
- Changing the Power State of a Virtual Machine
- Controlling the Virtual Machine Display
- Running Virtual Machines from DVDs or CD-ROM Discs
- Using PXE with Virtual Machines
- Installing Software in a Virtual Machine
- Cutting, Copying, and Pasting Text
- Using Devices in a Virtual Machine
- Command Reference
- Preserving the State of a Virtual Machine
- Suspending and Resuming Virtual Machines
- Taking Snapshots
- Using Disks in a Virtual Machine
- Configuring Hard Disk Storage in a Virtual Machine
- Configuring Optical and Floppy Drives
- Adding Drives to a Virtual Machine
- Using VMware Virtual Disk Manager
- Installing an Operating System onto a Physical Partition
- Disk Performance in Windows NT Guests on Multiprocessor Hosts
- Networking
- Components of the Virtual Network
- Common Networking Configurations
- Custom Networking Configurations
- Changing the Networking Configuration
- Advanced Networking Topics
- Selecting IP Addresses on a Host-Only Network or NAT Configuration
- Avoiding IP Packet Leakage in a Host-Only Network
- Maintaining and Changing the MAC Address of a Virtual Machine
- Controlling Routing for a Host-Only Network on a Linux Host
- Issues with Host-Only Networking on a Linux Host
- Setting Up a Second Bridged Network Interface on a Linux Host
- Configuring Bridged Networking When Using Teamed Network Interface Cards
- Setting Up Two Separate Host-Only Networks
- To set up the second host-only interface on a Windows host
- To set up the second host-only interface on a Linux host
- Configuring the Virtual Machines
- Configuration 1 - Connect to the Default Host-Only Interface
- Configuration 2 - Connect to the Newly Created Host-Only Interface
- Configuration 3 - Connect to Two Host-Only Interfaces
- Routing Between Two Host-Only Networks
- Setting Up the First Host-Only Interface
- To set up the second host-only interface on a Windows host
- To set up the second host-only interface on a Linux host
- Setting Up the Virtual Machines
- Virtual Machine 1 - Connected to the Default Host-Only Interface
- Virtual Machine 2 - Connected to the Newly Created Host-Only Interface
- Virtual Machine 3 - Connected to Both Host-Only Interfaces
- Using Virtual Ethernet Adapters in Promiscuous Mode on a Linux Host
- Understanding NAT
- Using Samba for File Sharing on a Linux Host
- Sample smb.conf for Host-Only Networking
- Sample smb.conf for Bridged Networking
- Adding User Names and Passwords to the VMware Server Samba Password File
- If You Are Already Running Samba
- Using a Samba Server for Both Bridged and Host-Only Networks
- Using VMware Server’s Samba with an Existing Installation
- Sample smb.conf for Running Two Samba Servers at the Same Time
- Configuring Devices
- Using Parallel Ports
- Using Serial Ports
- Keyboard Mapping on a Linux Host
- Using USB Devices in a Virtual Machine
- Connecting to a Generic SCSI Device
- Using Two-Way Virtual Symmetric Multiprocessing (Experimental)
- Video and Sound
- Performance Tuning for Virtual Machines
- Glossary
- Index
VMware Server Virtual Machine Guide
42 VMware, Inc.
NOTE If!you!are!running!VMware!Server!on!a!Windows!host!and!your!virtual!
machine!has!only!one!CD‐ROM!drive,!the!CD‐ROM!drive!must!be!configured!
as!an!IDE!or!SCSI!CD‐ROM!drive.!It!cannot!be!configured!as!a!generic!SCSI!
device.
To!add!an!IDE!or!SCSI!CD‐ROM!drive,!see!“A d d in g , !Configuring,!and!Removing!
Devices!in!a!Virtual!Machine”!on!page 103.!For!information!about!generic!SCSI,!see!
“Connecting!to!a!Generic!SCSI!Device”!on!page 237.
You!can!automate!the!installation!of!VMware!Tools!in!a!Windows!guest!operating!
system.!For!information,
!see!“Automating!the!Installation!of!VMware!Tools!in!a!
Windows!Guest”!on!page 48.
To install VMware Tools in a Windows Guest Operating System
1Power!on!the!virtual!machine.
2Log!on!to!the!virtual!machine!as!an!administrator.
NOTE You!must!be!an!administrator!to!install!VMware!Tools!in!a!Windows!
guest!operating!system,!unless!the!guest!operating!system!is!Windows!
Me,!Windows!98,!or!other!early!versions!of!Windows.
3When!the!guest!operating!system!starts,!choose!VM!>!Install!VMware!Tools.
The!remaining!steps!take!place!inside!the!virtual!machine.!If!you!have!autorun!
enabled!in!your!guest!operating!system!(the!default!setting!for!Windows!operating!
systems),!a!splash!screen!that!
says!VMware!Tools!appears,!followed!by!a!dialog!
box!that!asks!whether!you!want!to!install!VMware!Tools.
4Click!Yes!to!launch!the!InstallShield!wizard.
If!autorun!is!not!enabled,!the!dialog!box!does!not!appear.!If!it!doesn’t!appear,!run!
the!VMware!Tools!installer.!Click!Start!>!Run!and!enter!D:\setup.exe
NOTE You!do!not!use!an!actual!CD‐ROM!to!install!VMware!Tools.!The!VMware!
Server!software!contains!an!ISO!image!that!looks!like!a!CD‐ROM!to!your!
guest!operating!system!and!even!appears!as!a!CD‐ROM!in!Windows!
Explorer.!This!image!contains!all!the!files!needed!to!install!VMware
!Tools!
in!your!guest!operating!system.!When!you!finish!installing!VMware!
Tools,!this!image!file!no!longer!appears!in!your!CD‐ROM!drive.