Specifications
Table Of Contents
- Virtual Machine Guide
- Contents
- Introduction and System Requirements
- VMware Server Overview
- Features of VMware Server
- Support for 32-bit and 64-bit Guest Operating Systems
- Two-Way Virtual SMP (Experimental Support)
- Connect to VMware GSX Virtual Machines and Hosts
- Upgrade and Use GSX Virtual Machines
- Move Existing Virtual Machines
- Compatible with VMware Workstation 5.x Virtual Machines
- Configure Virtual Hardware Devices to be Automatically Detected
- Take and Revert to Snapshots in the Background
- Support for VMware Virtual Machine Importer
- Support for VirtualCenter
- APIs Included with VMware Server
- Host System Requirements
- Virtual Machine Specifications
- Virtual Processor
- Virtual Chipset
- Virtual BIOS
- Virtual Memory
- Virtual Graphics
- Virtual IDE Drives
- Virtual SCSI Devices
- Virtual PCI Slots
- Virtual Floppy Drives
- Virtual Serial (COM) Ports
- Virtual Parallel (LPT) Ports
- Virtual USB ports
- Virtual Keyboard
- Virtual Mouse and Drawing Tablets
- Virtual Ethernet Card
- Virtual Networking
- Virtual Sound Adapter
- Supported Guest Operating Systems
- Technical Support Resources
- Creating a New Virtual Machine
- Using VMware Tools
- About VMware Tools
- Installing VMware Tools
- Installing VMware Tools in a Windows Virtual Machine
- To install VMware Tools in a Windows Guest Operating System
- Additional Steps When Migrating from Old Versions of Windows
- To migrate from Windows NT guest operating systems
- To migrate from Windows Me guest operating systems
- To migrate from Windows 98 guest operating systems
- To migrate from Windows 95 guest operating systems
- Automating the Installation of VMware Tools in a Windows Guest
- Installing VMware Tools in a Linux Virtual Machine
- Installing VMware Tools in a NetWare Virtual Machine
- Installing VMware Tools in a Windows Virtual Machine
- Executing Scripts When the Virtual Machine’s Power State Changes
- Configuring VMware Tools
- Configuring VMware Tools in a Windows Virtual Machine
- Configuring VMware Tools in a Linux, FreeBSD, or Solaris Virtual Machine
- Configuring VMware Tools in a NetWare Virtual Machine
- Configuring VMware Tools in a NetWare 6.5, 6.0, or NetWare 5.1 Guest
- Viewing Information About VMware Tools
- Connecting Devices with VMware Tools
- Shrinking Virtual Disks with VMware Tools
- Setting Options with VMware Tools
- Configuring VMware Tools for NetWare Guests in the System Console
- Summary of VMware Tools Commands for a NetWare Guest
- About the VMware Tools Service
- Running Virtual Machines
- Overview of the VMware Server Console Window
- Connecting to Virtual Machines and VMware Server Hosts
- Changing the Power State of a Virtual Machine
- Controlling the Virtual Machine Display
- Running Virtual Machines from DVDs or CD-ROM Discs
- Using PXE with Virtual Machines
- Installing Software in a Virtual Machine
- Cutting, Copying, and Pasting Text
- Using Devices in a Virtual Machine
- Command Reference
- Preserving the State of a Virtual Machine
- Suspending and Resuming Virtual Machines
- Taking Snapshots
- Using Disks in a Virtual Machine
- Configuring Hard Disk Storage in a Virtual Machine
- Configuring Optical and Floppy Drives
- Adding Drives to a Virtual Machine
- Using VMware Virtual Disk Manager
- Installing an Operating System onto a Physical Partition
- Disk Performance in Windows NT Guests on Multiprocessor Hosts
- Networking
- Components of the Virtual Network
- Common Networking Configurations
- Custom Networking Configurations
- Changing the Networking Configuration
- Advanced Networking Topics
- Selecting IP Addresses on a Host-Only Network or NAT Configuration
- Avoiding IP Packet Leakage in a Host-Only Network
- Maintaining and Changing the MAC Address of a Virtual Machine
- Controlling Routing for a Host-Only Network on a Linux Host
- Issues with Host-Only Networking on a Linux Host
- Setting Up a Second Bridged Network Interface on a Linux Host
- Configuring Bridged Networking When Using Teamed Network Interface Cards
- Setting Up Two Separate Host-Only Networks
- To set up the second host-only interface on a Windows host
- To set up the second host-only interface on a Linux host
- Configuring the Virtual Machines
- Configuration 1 - Connect to the Default Host-Only Interface
- Configuration 2 - Connect to the Newly Created Host-Only Interface
- Configuration 3 - Connect to Two Host-Only Interfaces
- Routing Between Two Host-Only Networks
- Setting Up the First Host-Only Interface
- To set up the second host-only interface on a Windows host
- To set up the second host-only interface on a Linux host
- Setting Up the Virtual Machines
- Virtual Machine 1 - Connected to the Default Host-Only Interface
- Virtual Machine 2 - Connected to the Newly Created Host-Only Interface
- Virtual Machine 3 - Connected to Both Host-Only Interfaces
- Using Virtual Ethernet Adapters in Promiscuous Mode on a Linux Host
- Understanding NAT
- Using Samba for File Sharing on a Linux Host
- Sample smb.conf for Host-Only Networking
- Sample smb.conf for Bridged Networking
- Adding User Names and Passwords to the VMware Server Samba Password File
- If You Are Already Running Samba
- Using a Samba Server for Both Bridged and Host-Only Networks
- Using VMware Server’s Samba with an Existing Installation
- Sample smb.conf for Running Two Samba Servers at the Same Time
- Configuring Devices
- Using Parallel Ports
- Using Serial Ports
- Keyboard Mapping on a Linux Host
- Using USB Devices in a Virtual Machine
- Connecting to a Generic SCSI Device
- Using Two-Way Virtual Symmetric Multiprocessing (Experimental)
- Video and Sound
- Performance Tuning for Virtual Machines
- Glossary
- Index
VMware, Inc. 161
Chapter 7 Networking
Use!the!virtual!machine!settings!editor!(VM!>!Settings)!to!add!a!second!virtual!
network!adapter,!as!described!in!“Changing!the!Networking!Configuration”!on!
page 162.!Connect!the!second!adapter!to!Custom!(VMnet2).
Click!OK!to!save!the!configuration!and!close!the!virtual!machine!settings!editor.
3If!a!console!is!not!
running,!launch!one.!Open!virtual!machine!2.!Do!not!power!on!
the!virtual!machine.
Use!the!virtual!machine!settings!editor!(VM!>!Settings)!to!add!a!virtual!network!
adapter.!Connect!the!adapter!to!Custom!(VMnet2).
Click!OK!to!save!the!configuration!and!close!the!virtual!machine!settings!editor.
4If!a!console
!is!not!running,!launch!one.!Open!virtual!machine!3.!Do!not!power!on!
the!virtual!machine.
Use!the!virtual!machine!settings!editor!to!add!a!virtual!network!adapter.!Connect!
the!adapter!to!Custom!(VMnet2).
Use!the!virtual!machine!settings!editor!to!add!a!second!virtual!network!adapter.!
Connect!the!adapter!to
!Custom!(VMnet3).
Click!OK!to!save!the!configuration!and!close!the!virtual!machine!settings!editor.
5If!a!console!is!not!running,!launch!one.!Open!virtual!machine!4.!Do!not!power!on!
the!virtual!machine.
Use!the!virtual!machine!settings!editor!to!add!a!virtual!network!adapter.!Connect!
the!adapter!to!Custom!
(VMnet3).
Click!OK!to!save!the!configuration!and!close!the!virtual!machine!settings!editor.
6 Determine!the!network!addresses!used!for!VMnet2!and! VMnet3.
NOTE On!a!Windows!host,!you!can!skip!the!steps!for!configuring!network!
addresses!manually!and,!instead,!use!VMware!Server’s!DHCP!server.!
Choose!Host!>!Virtual!Network!Settings!>!DHCP!and!add!VMnet2!and!
VMnet3!to!the!list!of!virtual!networks!served!by!the!virtual!DHCP!server.!
Then!skip!to!step!9.
On!a!Windows!host,!open!a!command!prompt!on!the!host!computer!and!run!
ipconfig /all.!Note!the!network!addresses!used!by!each!virtual!adapter.
On!a!Linux!host,!run!ifconfig!at!the!console!or!in!a!terminal!window!on!the!host!
computer.!Note!the!network!addresses
!used!by!each!virtual!switch.
7 Launch!a!console,!open!each!virtual!machine!in!turn!and!install!the!appropriate!
guest!operating!system.