Installation guide

Field Descrip t io n
Name A name for the IBM iPD U device connected to the cluster into which the
fence daemon logs via the SNMP protocol.
IP Address The IP address or hostname assigned to the device.
UDP/TCP Port The UD P/TCP port to use for connection with the device; the default value is
161.
Login The login name used to access the device.
Password The password used to authenticate the connection to the device.
Password Script
(optional)
The script that supplies a password for access to the fence device. Using
this supersedes the Passwo rd parameter.
SNMP version The SNMP version to use (1, 2c, 3); the default value is 1.
SNMP community The SNMP community string; the default value is
private
.
SNMP security level The SNMP security level (noAuthNoPriv, authNoPriv, authPriv).
SNMP
authentication
protocol
The SNMP authentication protocol (MD5, SHA).
SNMP privacy
protocol
The SNMP privacy protocol (DES, AES).
SNMP privacy
protocol password
The SNMP privacy protocol password.
SNMP privacy
protocol script
The script that supplies a password for SNMP privacy protocol. Using this
supersedes the SN MP p rivacy p ro t o co l p asswo rd parameter.
Power wait Number of seconds to wait after issuing a power off or power on command.
Port The port.
fence_ipdu
The fence agent for iPD U over SNMP.
T ab le B.15. IBM Remot e Su p erviso r Ad ap t er II ( RSA II)
Field Descrip t io n
Name A name for the RSA device connected to the cluster.
Hostname The hostname assigned to the device.
Login The login name used to access the device.
Password The password used to authenticate the connection to the device.
Password
Script
(optional)
The script that supplies a password for access to the fence device. Using this
supersedes the Passwo rd parameter.
Power wait Number of seconds to wait after issuing a power off or power on command.
fence_rsa
The fence agent for the IBM RSA II management interface.
T ab le B.16 . IF MIB ( Red Hat En t erp rise Lin u x 5.6 an d lat er)
Field Descrip t io n
Name A name for the IF MIB device connected to the cluster.
IP address or
hostname
The IP address or hostname assigned to the device.
UDP/TCP port
(optional)
The UD P/TCP port to use for connection with the device; the default value is
161.
Login The login name used to access the device.
Password The password used to authenticate the connection to the device.
Red Hat Ent erprise Linux 5 Clust er Administ rat ion
94