Setup guide

# service name port number/protocol name
rcxmgr 23460/tcp
rcxweb 23461/tcp
rcxtask 23462/tcp
rcxmongrel1 23463/tcp
rcxmongrel2 23464/tcp
rcxdb 23465/tcp
nfdomain 23457/tcp
nfagent 23458/tcp
Note
In a clustered manager configuration, this command should not be used to start or stop the manager.
[Windows]
- Start the manager
In the Failover Cluster Management tree, right-click [Services and Applications] for managers, and select [Bring this service or
application online] from the popup menu.
- Stop the manager
In the Failover Cluster Management tree, right-click [Services and Applications] for managers, and select [Take this service or
application offline] from the popup menu.
[Linux]
Use the cluster system administration view (Cluster Admin) to start or stop the manager.
Refer to the PRIMECLUSTER manual for details.
Subcommands
start
Starts the manager.
stop
Stops the manager.
modify
Modifies the IP address used by the manager in the admin LAN or its port number.
snap
Collects troubleshooting data.
Options
Specify the following options when using the modify subcommand:
-ip ip
Specify the new manager IP address.
-port name=number
Specify the port name to be modified in name , and the new port number in number .
The port name can be one of the following values:
- rcxmgr
- rcxweb
- 35 -