Setup guide

- As a result of power operation being performed on a VM guest, an error may occur if the VM guest is moved to another VM host and
processes executed.
Refer to "E.3 Functional Differences between Products" of the "Setup Guide VE" for details.
- VM guests should be properly configured in order to use the "stop" or "restart" subcommands.
Stopping or restarting a VM guest that was not properly configured will result in an error unless the -force option is specified.
Refer to "E.2 Configuration Requirements" of the "Setup Guide VE" for details.
- For PRIMEQUEST servers, the warning message will not be displayed, even if there is a chance that the switchover will not be
correctly performed using Reserved SB settings.
- If ServerView Deployment Manager is used on the admin LAN, the switchover and failback subcommands cannot be used if the
managed servers do not fulfill the following conditions.
For more details, please refer to "Appendix F Co-Existence with ServerView Deployment Manager" of the "Setup Guide VE".
- Servers in local boot environments
- Servers in SAN boot environments without VIOM profiles
- The changes to the boot agent are valid while the physical server is registered. After reregistering the physical server, change the boot
agent using the command if necessary.
- 16 -