Setup guide

Property Contents
SERVER Server name (physical OS or VM host)
PRIMARY
Primary server
Name of the physical server that will be switched over with a spare server during a
server switchover.
SPARE
Spare server
Name of the spare server (switchover destination) assigned to the primary server.
If multiple spare servers are assigned, the name of each spare server is displayed
using commas (",") as a delimiters.
VLAN_SWITCH (*1)
Network re-configuration flag
This flag defines whether or not network settings will be re-configured during a server
switchover.
- When network settings are re-configured during server switchover
"ON" is displayed.
- When network settings are not re-configured during server switchover
"OFF" is displayed.
AUTO_SWITCH
Auto-Recovery flag
This flag defines whether or not Auto-Recovery is enabled.
- When Auto-Recovery is enabled
"ON" is displayed.
- When Auto-Recovery is not enabled
"OFF" is displayed.
ACTIVE
Active server
Displays the name of the currently active physical server.
SWITCHOVER_STATE
Switchover state
Displays the current switchover state. Displays one of the following:
- normal
Normal status (There are no switchover, failback, or takeover operations in
progress).
- switchover running
A switchover operation is in progress.
- switchover completed
A switchover operation has been completed.
- failback running
A failback operation is in progress.
- takeover running
A takeover operation is in progress.
*1: When a LAN switch blade is in IBP mode, the details of settings are displayed in this parameter.
-bootagt (optional)
Displays the information about the boot agent used when manipulating images.
The following properties are displayed for each server.
- 12 -