Service manual

Chapter 6 Replacing Parts

5. Gain access to the HP NetServer by referring to Replacing the Bezel and Replacing the

Covers.

CAUTION Wear a wrist strap and use a static-dissipating work surface connected to the

chassis when handling components. Ensure the metal of the wrist strap contacts

your skin.

6. Disconnect the signal cable (ribbon cable) and the power cable from the rear of the flexible disk

drive.

7. Use the T-15 driver to remove the two screws holding the flexible disk drive to the front of the

chassis.

Flexible Disk Drive Removal

8. Side the flexible forward and out of the chassis.

Replacing the Flexible Disk Drive

Move the mounting brackets from the old flexible disk drive to the replacement flexible disk drive and reverse

the above procedure.

NOTE The flexible disk drive connectors are keyed. Ensure the cables are fully seated.