Service manual

Chapter 6 Replacing Parts
77
5. Gain access to the HP NetServer by referring to Replacing the Bezel and Replacing the
Covers.
6. Remove all drives from the hot swap drive cage.
CAUTION Wear a wrist strap and use a static-dissipating work surface connected to the
chassis when handling components. Ensure that the metal of the wrist strap
contacts your skin.
7. Remove the fan module from the fan tray.
You may need a T-15 driver to loosen the thumbscrew on the back of the fan housing.
Thumbscrew
on back of fan
module
Fan Module Removal
8. Once the fan module is removed disconnect the SCSI data and power cables from the back of
the hot swap cage.
9. Use the T-15 driver to remove the eight screws holding the hot swap cage to the chassis.