Service manual

Chapter 1 General Information
2
Removing the HP NetServer's Bezel
CAUTION To prevent damage to the covers, support the cover as you remove it from the HP
NetServer. The NetServer’s covers can be easily damaged.
6. To remove the left side cover, use the key provided to unlock the Mass Storage Cage and
release the left side cover.
7. Loosen the thumbscrew on the front of the chassis for the left side cover and then pull the cover
forward to disengage it.
8. Move it to the left and away from the chassis.
9. If necessary, remove the right side cover by loosening its thumbscrew on the front of the
chassis.
The right cover does not provide any additional access to the interior, except the right side of
the mass storage drives and the control panel board.
10. Pull the cover forward and then slightly sideways to disengage it.
11. Move it to the right and away from the chassis.
Left
Cover
Right Cover
Thumbscrews (2)
Cover Pull
HP NetServer LC 2000 Covers