Service manual

Chapter 6 Replacing Parts

Press down on

Blue Tab to

Release Bezel

Slide Securing

Screws (2)

Blue Slide

Release Button (2)

Hinge Pins (3)

Removing the HP NetServer LC 2000r's Bezel

3. Lift the bezel away from the front of the HP NetServer.

Replacing the Rack Bezel

1. Reverse the process above by positioning the bezel over the hinge pins at the front of the HP

NetServer’s chassis.

Slide Securing Screws (2)

Hinge Pins(3) Handles(2)

Hinge Pins

2. Press the down on the Blue Bezel Release tab to engage the hinge pins of the bezel and then

release it.

3. Swing the bezel closed to the right.

Replacing the CD ROM Drive

Use this topic to remove and replace the CD ROM Drive. If necessary, use DiagTools to verify that the CD

ROM has failed.

1. Log off all users and if necessary, back-up files.

2. Follow instructions in your network operating system (NOS) documentation to gracefully shut

down all networking software and applications.

3. Press the power switch on the HP NetServer's control panel when prompted by the operating

system.