Service manual

Chapter 1 General Information
6
Extending the HP NetServer LC 2000r
CAUTION To prevent damage to the covers, support the cover as you remove it from the HP
NetServer. The NetServer’s covers are heavy.
12. To remove the top cover, use the key provided to unlock the Mass Storage Cage and release
the top cover.
13. Loosen the thumbscrew on the front of the chassis for the top cover and then pull the cover
forward to disengage.
14. Lift the top cover up and away from the chassis.
Top Cover
Bottom Cover
Cover Pull
Removing HP NetServer LC 2000r Covers
15. If necessary, remove the bottom cover by loosening the thumbscrew at the front of the HP
NetServer with one hand..