Service manual

Chapter 1 General Information
5
Press down on
Blue Tab to
Release Bezel
Slide Securing
Screws (2)
Blue Slide
Release Button (2)
Hinge Pins (3)
Removing the HP NetServer's Bezel
8. Lift the bezel away from the front of the HP NetServer.
9. Unscrew the slide securing screw (2) on each bracket securing the chassis to the column
adapter on each side of the rack.
10. Press in on each blue Slide Release button (2) with both hands to slide the HP NetServer out of
the rack.
Slide Securing Screws (2)
Hinge Pins(3) Handles(2)
Blue Slide
Release Button(2)
Releasing the Securing Buttons
11. Pull the NetServer out of the rack until it snaps into the safety locks in each slide with a click.