Installation guide

extent_size = 8192 # 4 Megabytes
max_lv = 0
max_pv = 0
physical_volumes {
pv0 {
id = "ZBW5qW-dXF2-0bGw-ZCad-2RlV-phwu-1c1RFt"
device = "/dev/sda" # Hint only
status = ["ALLOCATABLE"]
dev_size = 35964301 # 17.1491 Gigabytes
pe_start = 384
pe_count = 4390 # 17.1484 Gigabytes
}
pv1 {
id = "ZHEZJW-MR64-D3QM-Rv7V-Hxsa-zU24-wztY19"
device = "/dev/sdb" # Hint only
status = ["ALLOCATABLE"]
dev_size = 35964301 # 17.1491 Gigabytes
pe_start = 384
pe_count = 4390 # 17.1484 Gigabytes
}
pv2 {
id = "wCoG4p-55Ui-9tbp-VTEA-jO6s-RAVx-UREW0G"
device = "/dev/sdc" # Hint only
status = ["ALLOCATABLE"]
dev_size = 35964301 # 17.1491 Gigabytes
pe_start = 384
pe_count = 4390 # 17.1484 Gigabytes
}
pv3 {
id = "hGlUwi-zsBg-39FF-do88-pHxY-8XA2-9WKIiA"
device = "/dev/sdd" # Hint only
status = ["ALLOCATABLE"]
dev_size = 35964301 # 17.1491 Gigabytes
pe_start = 384
pe_count = 4390 # 17.1484 Gigabytes
}
}
logical_volumes {
mylv {
id = "GhUYSF-qVM3-rzQo-a6D2-o0aV-LQet-Ur9OF9"
status = ["READ", "WRITE", "VISIBLE"]
segment_count = 2
segment1 {
start_extent = 0
extent_count = 1280 # 5 Gigabytes
type = "striped"
stripe_count = 1 # linear
stripes = [
"pv0", 0
]
}
segment2 {
start_extent = 1280
extent_count = 1280 # 5 Gigabytes
3. Sample Metadata
79