Installation guide

Field Description

commands to the given IPMI port.

Password The password used to authenticate the connection to the IPMI

port.

Password Script

(optional)

The script that supplies a password for access to the fence device.

Using this supersedes the Password parameter.

Authentication Type none, password, md2, or md5

Use Lanplus True or 1. If blank, then value is False.

Table B.10. IPMI (Intelligent Platform Management Interface) LAN

Field Description

Name A name to assign the Manual fencing agent. Refer to fence_manual(8) for

more information.

Table B.11. Manual Fencing

Warning

Manual fencing is not supported for production environments.

Field Description

Name A name for the McData device connected to the cluster.

IP Address The IP address assigned to the device.

Password The password used to authenticate the connection to the device.

Password

Script

(optional)

The script that supplies a password for access to the fence device. Using this

supersedes the Password parameter.

Table B.12. McData SAN Switch

Field Description

Name A name for the WTI RPS-10 power switch connected to the cluster.

Device The device the switch is connected to on the controlling host (for example,

/dev/ttys2).

Appendix B. Fence Device Parameters