Installation guide

The print command also displays the partition's type (such as linux-swap, ext2, ext3, and so on).
Knowing the type of the partition helps you in determining whether to remove the partition.
Remove the partition with the command rm. For example, to remove the partition with minor number 3:
rm 3
Important
The changes start taking place as soon as you press [Enter], so review the command before
committing to it.
After removing the partition, use the print command to confirm that it is removed from the partition
table.
Once you have removed the Linux partitions and made all of the changes you need to make, type
quit to quit parted.
After quitting parted, type exit at the boot prompt to exit rescue mode and reboot your system,
instead of continuing with the installation. The system should reboot automatically. If it does not, you
can reboot your computer using Control+Alt+Delete .
⁠Chapt er 5. Removing Red Hat Ent erprise Linux
69