Installation guide

Note
The CTC, and NETIUCV drivers have been deprecated and are no longer supported
in Red Hat Enterprise Linux.
For example (a sample qeth SUBCHANNEL statement):
SUBCHANNELS=0.0.0600,0.0.0601,0.0.0602
The following parameters are optional:
HOSTNAME=string
Where string is the hostname of the newly-installed Linux guest.
NETTYPE=type
Where type must be one of the following: qeth or lcs.
IPADDR=IP
Where IP is the IP address of the new Linux guest.
NETWORK=network
Where network is the address of your network.
NETMASK=netmask
Where netmask is the netmask.
BROADCAST=broadcast
Where broadcast is the broadcast address.
GATEWAY=gw
Where gw is the gateway-IP for your eth device.
MTU=mtu
Where mtu is the Maximum Transmission Unit (MTU) for this connection.
DNS=server1:server2:additional_server_terms:serverN
Where server1:server2:additional_server_terms:serverN is a list of DNS servers, separated by
colons. For example:
DNS=10.0.0.1:10.0.0.2
SEARCHDNS=domain1:domain2:additional_dns_terms:domainN
Where domain1:domain2:additional_dns_terms:domainN is a list of the search domains,
separated by colons. For example:
SEARCHDNS=example.com:example.org
Red Hat Ent erprise Linux 5 Inst allat ion G uide
214