Installation guide

Fig u re 12.15. Co n f ig u re ISCSI Paramet ers
Please note that you will be able to reattempt with a different ISCSI target IP should you enter it
incorrectly, but in order to change the ISCSI initiator name you will need to restart the installation.
12.18. Creat e Default Layout
Create default layout allows you to have some control concerning what data is removed (if any) from
your system. Your options are:
Remove all partitions on selected drives and create default layout — select
this option to remove all partitions on your hard drive(s) (this includes partitions created by other
operating systems such as Windows VFAT or NTFS partitions).
Warning
If you select this option, all data on the selected hard drive(s) is removed by the installation
program. Do not select this option if you have information that you want to keep on the
hard drive(s) where you are installing Red Hat Enterprise Linux.
Remove Linux partitions on selected drives and create default layout —
select this option to remove only Linux partitions (partitions created from a previous Linux
installation). This does not remove other partitions you may have on your hard drive(s) (such as
VFAT or FAT32 partitions).
Use free space on selected drives and create default layout — select this
option to retain your current data and partitions, assuming you have enough free space available
on your hard drive(s).
⁠Chapt er 1 2 . Inst alling on IBM Syst em i and IBM Syst em p syst ems
131