Installation guide

Figure 4.19. Network Configuration

The installation program automatically detects any network devices you have and displays them

in the Network Devices list.

Once you have selected a network device, click Edit. From the Edit Interface pop-up screen,

you can choose to configure the IP address and Netmask (for IPv4 - Prefix for IPv6) of the

device via DHCP (or manually if DHCP is not selected) and you can choose to activate the

device at boot time. If you select Activate on boot, your network interface is started when you

boot. If you do not have DHCP client access or you are unsure what to provide here, please

contact your network administrator.

20. Network Configuration