Installation guide

Figure 4.13. Configure ISCSI Parameters
Please note that you will be able to reattempt with a different ISCSI target IP should you enter it
incorrectly, but in order to change the ISCSI initiator name you will need to restart the installa-
tion.
17. Create Default Layout
Create default layout allows you to have some control concerning what data is removed (if any)
from your system. Your options are:
Remove all partitions on selected drives and create default layout — select this option
to remove all partitions on your hard drive(s) (this includes partitions created by other operat-
ing systems such as Windows VFAT or NTFS partitions).
Caution
If you select this option, all data on the selected hard drive(s) is removed by the
installation program. Do not select this option if you have information that you
want to keep on the hard drive(s) where you are installing Red Hat Enterprise
Linux.
Remove Linux partitions on selected drives and create default layout — select this op-
tion to remove only Linux partitions (partitions created from a previous Linux installation).
This does not remove other partitions you may have on your hard drive(s) (such as VFAT or
FAT32 partitions).
17. Create Default Layout
34