Installation guide

fatal error occurs.
nomount
Don't automatically mount any installed Linux partitions in rescue mode.
nonet
Do not auto-probe network devices.
noparport
Do not attempt to load support for parallel ports.
nopass
Don't pass keyboard/mouse info to stage 2 installer, good for testing keyboard and mouse
config screens in stage2 installer during network installs.
nopcmcia
Ignore PCMCIA controller in system.
noprobe
Do not attempt to detect hw, prompts user instead.
noshell
Do not put a shell on tty2 during install.
nostorage
Do not auto-probe storage devices (SCSI, IDE, RAID).
nousb
Do not load USB support (helps if install hangs early sometimes).
nousbstorage
Do not load usbstorage module in loader. May help with device ordering on SCSI systems.
rescue
Run rescue environment.
resolution=<mode>
Run installer in mode specified, '1024x768' for example.
serial
Turns on serial console support.
skipddc
Skips DDC probe of monitor, may help if it's hanging system.
syslog=<host>[:<port>]
Once installation is up and running, send log messages to the syslog process on <host>,
and optionally, on port <port>. Requires the remote syslog process to accept connections
(the -r option).
text
Force text mode install.
updates
Prompt for floppy containing updates (bug fixes).
10. Starting a Kickstart Installation
275