Installation guide

command at the boot: prompt (where ks.cfg is the name of the kickstart file):
linux ks=cdrom:/ks.cfg
Other options to start a kickstart installation are as follows:
askmethod
Do not automatically use the CD-ROM as the install source if we detect a Red Hat Enter-
prise Linux CD in your CD-ROM drive.
autostep
Make kickstart non-interactive.
debug
Start up pdb immediately.
dd
Use a driver disk.
dhcpclass=<class>
Sends a custom DHCP vendor class identifier. ISC's dhcpcd can inspect this value using
"option vendor-class-identifier".
dns=<dns>
Comma separated list of nameservers to use for a network installation.
driverdisk
Same as 'dd'.
expert
Turns on special features:
• allows partitioning of removable media
• prompts for a driver disk
gateway=<gw>
Gateway to use for a network installation.
graphical
Force graphical install. Required to have ftp/http use GUI.
isa
Prompt user for ISA devices configuration.
ip=<ip>
IP to use for a network installation, use 'dhcp' for DHCP.
keymap=<keymap>
Keyboard layout to use. Valid values are those which can be used for the 'keyboard' kick-
start command.
ks=nfs:<server>:/<path>
The installation program looks for the kickstart file on the NFS server <server>, as file
10. Starting a Kickstart Installation
272