Installation guide

Figure 17.11. Configure FCP Device
Note
The installer requires that at least one ECKD DASD be defined. In the situation
where a SCSI-only installation is desired a DASD= parameter should be entered
into the CMS conf file with a non-existent device number. This will satisfy
Anaconda's requirement for a defined ECKD DASD, while resulting in a SCSI-only
environment.
13. Create Default Layout
Create default layout allows you to have some control concerning what data is removed (if any)
from your system. Your options are:
• Remove all partitions on selected drives and create default layout — select this option
to remove all partitions on your hard drive(s) (this includes partitions created by other operat-
ing systems such as z/VM or z/OS).
13. Create Default Layout
170