Installation guide

Figure 12.19. Editing a Network Device
Note
Do not use the numbers as seen in this sample configuration. These values will not
work for your own network configuration. If you are not sure what values to enter,
contact your network administrator for assistance.
If you have a hostname (fully qualified domain name) for the network device, you can choose to
have DHCP (Dynamic Host Configuration Protocol) automatically detect it or you can manually
enter the hostname in the field provided.
Finally, if you entered the IP and Netmask information manually, you may also enter the Gate-
way address and the Primary and Secondary DNS addresses.
Tip
To change your network configuration after you have completed the installation,
use the Network Administration Tool.
Type the system-config-network command in a shell prompt to launch the Net-
work Administration Tool. If you are not root, it prompts you for the root pass-
word to continue.
21. Time Zone Configuration
125