Installation guide

Field Description

Name A name for the WTI RPS-10 power switch connected to the cluster.

Device The device the switch is connected to on the controlling host (for example, /

dev/ttys2).

Port The switch outlet number.

Table B.13. RPS-10 Power Switch (two-node clusters only)

Field Description

Name A name for the SANBox2 device connected to the cluster.

IP Address The IP address assigned to the device.

Password The password used to authenticate the connection to the device.

Password

Script

(optional)

The script that supplies a password for access to the fence device. Using this

supersedes the Password parameter.

Table B.14. QLogic SANBox2 Switch

Field Description

Name Name of the node to be fenced. Refer to fence_scsi(8) for more information.

Table B.15. SCSI Fencing

Field Description

Name Name of the guest to be fenced.

Table B.16. Virtual Machine Fencing

Field Description

Name A name for the Vixel switch connected to the cluster.

IP Address The IP address assigned to the device.

Password The password used to authenticate the connection to the device.

Password

Script

The script that supplies a password for access to the fence device. Using this

supersedes the Password parameter.