Installation guide

Warning

Manual fencing is not supported for production environments.

Table B.14 . McData SAN Switch

Field Description

Name A name for the McData device connected to the cluster.

IP Address The IP address assigned to the device.

Password The password used to authenticate the connection to the device.

Password

Script

(optional)

The script that supplies a password for access to the fence device. Using this

supersedes the Password parameter.

Port The switch outlet number.

Table B.15. QLogic SANBox2 Switch

Field Description

Name A name for the SANBox2 device connected to the cluster.

IP Address The IP address assigned to the device.

Password The password used to authenticate the connection to the device.

Password

Script

(optional)

The script that supplies a password for access to the fence device. Using this

supersedes the Password parameter.

Port The switch outlet number.

Table B.16. RPS- 10 Power Switch (t wo-node clusters only)

Field Description

Name A name for the WTI RPS-10 power switch connected to the cluster.

Device Name The device name of the device the switch is connected to on the controlling host (for

example, /dev/ttys2).

Port The switch outlet number.

Table B.17. SCSI Fencing

Field Description

Name A name for the SCSI fence device.

Node name Name of the node to be fenced. Refer to the fence_scsi(8) man page for more

information.

Fence Device Parameters