Installation guide

Table B.6. Fujitsu Siemens Remoteview Service Board (RSB)

Field Description

Name A name for the RSB to use as a fence device.

Hostname The hostname assigned to the device.

Password The password used to authenticate the connection to the device.

Password

Script

(optional)

The script that supplies a password for access to the fence device. Using this

supersedes the Password parameter.

Table B.7. GNBD (Global Network Block Device)

Field Description

Name A name for the GNBD device used to fence the cluster. Note that the GFS server

must be accessed via GNBD for cluster node fencing support.

Server The hostname of the server to fence the client from, in either IP address or

hostname form. For multiple hostnames, separate each hostname with a space.

IP address The cluster name of the node to be fenced. Refer to the fence_gnbd(8) man page

for more information.

Table B.8. HP iLO (Integrated Light s Out)

Field Description

Name A name for the server with HP iLO support.

Hostname The hostname assigned to the device.

Password The password used to authenticate the connection to the device.

Password

Script

(optional)

The script that supplies a password for access to the fence device. Using this

supersedes the Password parameter.

Use SSH (Rhel 4.8 and later) Indicates that system will use SSH to access the device.

Table B.9. IBM Blade Center

Field Description

Name A name for the IBM BladeCenter device connected to the cluster.

IP Address The IP address assigned to the device.

Password The password used to authenticate the connection to the device.

Password

Script

(optional)

The script that supplies a password for access to the fence device. Using this

supersedes the Password parameter.

Blade The blade of the device.

Use SSH (Rhel 4.8 and later) Indicates that system will use SSH to access the device.

Fence Device Parameters