Installation guide
Table 6.1. Members Stat us
Members Status Description
Member
The node is part of the cluster.
Note: A node can be a member of a cluster; however, the node may be
inactive and incapable of running services. For example, if rgm anager is
not running on the node, but all other cluster software components are
running in the node, the node appears as a Member in the Cluster
Status Tool.
Dead The node is unable to participate as a cluster member. T he most basic
cluster software is not running on the node.
Table 6.2. Services Status
Services Status Description
Started The service resources are configured and available on the cluster system
that owns the service.
Pending The service has failed on a member and is pending start on another
member.
Disabled The service has been disabled, and does not have an assigned owner. A
disabled service is never restarted automatically by the cluster.
Stopped The service is not running; it is waiting for a member capable of starting the
service. A service remains in the stopped state if autostart is disabled.
Failed The service has failed to start on the cluster and cannot successfully stop
the service. A failed service is never restarted automatically by the cluster.
6.3. Modifying the Cluster Configuration
To modify the cluster configuration (the cluster configuration file (/etc/cluster/cluster.conf), use
the Cluster Configuration Tool. For more information about using the Cluster Configuration Tool,
refer to Chapter 5, Configuring Red Hat Cluster With system-config-cluster.
Warning
Do not manually edit the contents of the /etc/cluster/cluster.conf file without guidance
from an authorized Red Hat representative or unless you fully understand the consequences of
editing the /etc/cluster/cluster.conf file manually.
Chapter 6. Managing Red Hat Cluster With system-config-cluster
77